China OEM 15kw Screw Air Compressor 8bar 80 Cfm 220 Voltage Silence Vertical Air Compressor shaft collar with set screw

Product Description

 Permanent-Magnet Variable Frequency Screw Compressor

♦ Intelligent Touch-Screen Design

♦ Direct-driven

♦ Air Cooling

♦ Oil Filter

♦ Air Filter 

♦ Stainless Steel

♦ Piping Design


Product features
One shaft-type structure
1. Permanent magnet motor and air-end use the embedded integrated Shaft connecting structure, more compact, 100% transmission Efficiency.
2. No motor bearings, eliminating the motor bearing fault points. Different speeds, permanent magnet
motor with high efficiency, Remarkable energy-saving effect
1. At the rated speed point, permanent magnet motor efficiency is higher Than ordinary motors.
2. Under low motor speed, a permanent magnet motor can still keep high Motor efficiency. If the gas consumption is less, it still keeps extremely High efficiency. Compared with common frequency conversion
3: Motor, the motor efficiency appears obvious gap and the air Compressor has effective energy saving
It has an integrated structure, configuration of high-efficiency Permanent magnet motor, small size, saving space, and easy disassembly. Deploying an efficient permanent magnet variable frequency controller, it Small volume, low noise Can change the speed of the permanent magnet motor according to The exhaust volume, it will achieve lower operation noise than ordinary Ones.
4. Permanent magnet motor has high-performance NdFeB permanent Magnet, 120 º C without loss of excitation, and service life of over 15 Years.
5. Stator coil adopts special inverter corona resistant enameled wire. Insulation performance and longer service life.
6. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, with no damage to electrical equipment.OSG-EZV series permanent magnet compressor Stable operation.

Energy-saving advantages:
a. Permanent magnet motor has high-performance NdFeB permanent Magnet, 120 º C without loss of excitation, and service life of over 15 Years.
b. Stator coil adopts special inverter corona resistant enameled wire. Insulation performance and longer service life.
c. Realizing soft start, the motor current will not exceed the full load Current during operation, and greatly reduce the impact on network Equipment, no damage to electrical equipment.OSG-EZV series permanent magnet compressor
Energy-saving advantages:
Condition energy saving
1: The permanent magnet motor remains high efficiency at low speeds, ensuring Obvious energy-saving advantages in small air volumes.
2: Frequency range from 0%-100% (common conversion from 60%-100%)
3: Compared with the fixed speed compressor, energy saving 22%-40%
4: Compared with the common inverter compressor, energy saving 5%-15%
5: System volume fluctuations larger, then energy-saving effect more obvious.
6: Energy saving system of unloading (inverter):
According to the stationary air compressors in gas consumption fluctuation, it has the unloading time, then the air compressor idling but also need 45% of the Electricity, but the permanent-magnet frequency air compressor will control for Inverter, no unloading and no waste. If the air compressor units become larger,
Energy saves more. Save the wasted electric energy by pressure control bandwidth (energy saving):
The fixed compressor must set a minimum control pressure for the 1Barg band (i. E. Air Compressor limits) to avoid the impact on the unit and the power grid. Several Machines must use together with a pressure gradient, more wide pressure, while the OSG permanent-magnet variable-frequency Air compressor series is inverter control, Unlimited stop, no need to set pressure, but a pressure point on the line. With the pressure Of each 0.14Barg bandwidth, the system can save energy by 1%.
Energy saving startup (inverter):
The Air compressor’s starting current is 3-6 times the rated current, the frequent Start will waste a lot of energy, and the frequency conversion type has no frequent Starting and stopping, but a soft start. The maximum current does not exceed the rated working current, no energy waste. At the same time also greatly reduce the impact on network equipment, and no damage to electrical equipment OSG company has obtained a compressor production license(certificate NO: XK06-571-0571), has obtained a quality system certificate, and a general machinery certificate. Product design, Manufacturing processes are strict in accordance with ISO9001: 2008 quality system standards

Permanent magnet motor

Synchronous motor with permanent magnet and frequency

converter without any bearing, elastic coupling, or sealing washer.

Eliminate wear, leakage, and replacement.

Variable speed drive

Variable capacity, controlled cost.

The life cycle cost of the compressor can be reduced by 22% on


State-of-the-art screw components

The material of the rotor is special steel.

Advanced wear-resistant bearings.

The rotating screw comes standard with oversized to achieve the

highest efficiency.

Intelligent controller

Increased reliability: durable keyboard, user-friendly, multilingual

user interface.

Improved ease of use: an intuitive navigation system with main

operation conditions include warning indications, maintenance

scheduling etc.

ZheJiang CZPT Gas Compressor Manufacturing Co.,Ltd. founded in 2005, is a leading high technology of machine and equipment manufacturer integrating the design, R&D, production, sales and service for air compressors & Mining Equipment. Adopting advanced technology, design concept and quality control, and we are CZPT to provide customized products to meet customers’ OEM needs.
Our company has more than 520 employees, including 86 senior technicians and professional engineers. Our technical team provides our customers with professional air system solutions. With the total 15000 square meters of the facility, 4 modern advanced production lines are built up to ensure production capacity to meet customer requirements.
Our company has been awarded the honorary title of “ZheJiang high-tech enterprise” and our products enjoy high honors in the industry. Our company has the ISO9001 certification and was awarded the qualification certificate of equipment through military contracts in 2018.
We offer the following products and services:
1. Screw air compressor
    1.1 Oil-free screw air compressor
    1.2 Oil-injected air compressor
2. Reciprocating piston air compressor
    2.1 Piston air compressor
    2.2 Oil-free piston air compressor
    2.3 Piston medium & high-pressure air compressor
3. Portable air compressor & Mining Equipment
    3.1 Diesel or Electric portable screw air compressor
    3.2 Air Pick, Rock Drill, DTH Drilling Rig, Crawler Drilling Rig
4. Air compressor accessories
    4.1 CZPT or Adsorption compressed air drier
    4.2 Compressed air filter or tank
    4.3 Lubrication oil
We have a complete system of after-sales service and quality assurance. The company’s material purchase, inspection, manufacturing, installation, and testing are strictly in accordance with the ISO procedures. which will ensure each compressor has reliable quality and has a complete record to trace if needed.

Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q: How can we start ordering with your factory?
A: First, leave us an inquiry and advise which item you’re interested in, and then we will contact you within 24 hours. You’re so kind if provide all the detailed information, will be better for us to know exactly what you need.

Q: What is your MOQ?
A: Different products have different MOQs, most are 1 set.

Q: What are your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages.

Q: How about your delivery time?
A: Generally, it will take 90 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Do you have a trading company or a real factory?
A: We are a 100% factory; we are located in ZheJiang city, China.

After-sales Service: Online Support
Warranty: 1 Years
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Structure Type: Closed Type
US$ 1500/Piece
1 Piece(Min.Order)

Request Sample



Customized Request


Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from two different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In one revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have one contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.

Self-locking property of screw shaft

A self-locking screw is one that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but one of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using three steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require two heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding two components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

China OEM 15kw Screw Air Compressor 8bar 80 Cfm 220 Voltage Silence Vertical Air Compressor   shaft collar with set screwChina OEM 15kw Screw Air Compressor 8bar 80 Cfm 220 Voltage Silence Vertical Air Compressor   shaft collar with set screw
editor by CX 2023-04-20